TRIKES STORAGES
There are models for normal and electric bikes.
Those for electric bikes are higher than for normal bikes.
How do you determine which type you need?
In order to determine which type suits you best, proceed as follows:
1. Set up your bikes parallel to a wall, fence or hedge.
2. Measure the distance from the wall to the furthest bike.
3. This gives you the inside width, which usually determines the type of storage you are looking for.
4. In the table with the inner dimensions of the storage areas, look at a larger inside width than you have measured at 2.
5. This gives you the type of storage you need at least!
6. Also measure the length of the longest bike and the height of the highest bike and see if the inner length and height of the type of storage found under 5. still meet.
7. If you have normal bikes, then usually the RG version is sufficient; for electric bikes you usually need the RGH version.
8. Finally, look at the external dimensions of the chosen type in the table and check whether you have the necessary space.
There are also 3 types of bicycle storage where the bikes are not placed in the driving direction, but parallel to the rear wall.
These types (LMF203D-RGH, LMF203D125-RGH and LMF203D150-RGH) are suitable for both normal and electric bikes.
To determine whether this storage is suitable for you, proceed as follows:
1. Set up your bikes parallel to a wall, fence or hedge.
2. Measure the distance from the wall to the furthest bike.
3. This gives you the inside depth.
4. In the table with the internal dimensions of this storage room, check that the inner depth is sufficient.
5. Also measure the length of the longest bike and the height of the highest bike and see if the type of inside width and height is still sufficient.
6. Finally, look at the external dimensions of the chosen type in the table and check whether you have the necessary space.
The bicycle storage facilities have the following properties:
• reinforced with ground bracket (s)
• folding waterproof plywood roof section with double layer of epoxy with 2 gas springs
• fully ventilating
• doors and lid lockable with one cylinder lock
• top and door closure finished with aluminum
• rainwaterproof
• maintenance-free but easy to pickle
• delivered in panels
• easy assembly
All models and dimensions can be found in this PDF file:
